Home
Our Products
Product Use
Shop All Products
Care Kits
Cleaners
Polishes
Sealers
Shipping Policy
Testimonials
Stone Care Tips
FAQ's
Articles
Contact Us
 

MB-13 Stone Polish

FAQ's


What Is MB-13 Stone Polish?
It's a polish used to Enhance, Protect and Beautify natural stone.

Why Use It? Clean with MB-5 Daily Spray Cleaner.
  • Add shine and depth to your stone.
  • Reduce fingerprints.
  • Make everyday cleaning easier.
  • Add a protective shield to repel water.
  • Restore slightly worn down stones.
Where Do I Use It?
Use it on travertine, granite, marble, limestone, onyx ... all polished stone surfaces. Use it on vertical or horizontal surfaces such as countertops, backsplashes, vanities, showers, fireplaces, etc.
Do Not use MB-13 Stone Polish on your floors.Spray on MB-13 Stone Polish.

How Often Do I Use It?
It's totally up to you.
  • Apply it before a dinner party or family gathering.
  • Apply it on a schedule such as every Saturday.
  • Or, visually decide when your stone needs a polish.
Buff with a clean white rag. How Do I Use MB-13 Stone Polish?
  1. Clean your polished surface with a cleaner such as MB-5 Daily Spray Cleaner.
  2. Spray a little MB-13 Stone Polish on your surface.
  3. Buff by hand with a clean white cloth or a hand held buffer.

TIPS -
  • First time using MB-13 Stone Polish?
    Apply a second coat in a day or two.
  • Don't use too much! It won't hurt your stone but you will have to buff longer.
  • You never need to strip it, just reapply when needed.

How Long Does MB-13 Take to Apply?
This depends on how much stone you are polishing and where it is (walls, counters, nooks, etc.). Typically, one hundred square feet of countertops will take about 10 - 15 minutes.

Does It Work?
The short answer... Yes.

Compare polished and non polished.

We tested the MB-13 Stone Polish on a dusty piece of Black Galaxy, 2 foot x 2 foot. We wanted to see if the MB-13 added a really noticeable shine and also, if there was a significant difference between hand buffing and using a machine.

What We Did....

  1. Cleaned the Black Galaxy with MB-5 Daily Spray Cleaner.
  2. Placed a piece of blue painters tape down the center.
  3. Sprayed two squirts of of MB-13 Stone Polish on each side of the tape.
  4. Hand buffed one side and machine buffed the other.

Buff with clean a white rag or a hand held buffer.

Results Hand polished and machine polished.

There was a slight difference in shine between hand buffing and machine buffing. The color was deeper and the reflections were a little crisper on the machine buffed side. But, it doesn't warrant recommending that you apply MB-13 with a buffer.
Either way works.

Did The Shine Improve?
YES!

The strip down the center is not polished.



Our piece of Black Galaxy sparkled on both sides of the tape! The stone felt as smooth as glass. You can see where we removed the painters tape from the center of the stone. The non polished strip down the center is duller when compared to the surrounding areas.


We decided to try it on a few different stones.
The polished side is on your right.

Compare polished and unpolished stones.

MB-13 Stone Polish improved the look and feel of all the stones we applied it to. With some stones, the look improved immensely. The stone was shinier and the the color deepened... it looked like you could step into the stone. With others, the change was still noticeable, but not as drastic. All of the stone surfaces felt as smooth as glass after polishing with the MB-13.

Purchase MB-13 Stone Polish

Top of Page -
MB-13 Stone Polish



footer for MB-13 Stone Polish page